Next Prev

Halogen Leak Detector WJL-6000

Halogen Leak Detector WJL-6000

General descriptions:
Incorporated with advanced leak detect technology. WJL-6000 is our new product with the functions of easy operation, stable function and small appearance; it’s an ideal and economic halogen leak detector.

Main features:

Detects all kinds of halogen refrigerant gas
Sensitivity adjusted at any time and it can be adjusted automatically to the best state of detecting
Inner precise IC with Ultra-Low power consume circuit design, more stable, longer battery time
Double-color visual display of battery voltage
Excellent sensor, high sensitivity, longer use time

The WJL-6000 may also be used to:
Detect leaks in other systems and storage/recovery containers. It will respond to all halogenated (contains Chlorine of Fluorine) refrigerants.    This includes, but is not limited to:
   CFCs e.g. R12, R11, R500, R503 etc...
   HCFCs e.g. R22, R123, R124, R502 etc...
   HFCs e.g. R134a, R404s, R125 etc...
Blends such as AZ-50. HP62. MP39 etc...
Detect Ethylene Oxide gas leaks in hospital sterilizing equipment (it will detect the halogenated carrier gas).
Detect SF-6 in high voltage circuit breakers.
Detect most gases that contain chlorine, fluorine and bromine (halogen gases).
Detect cleaning agents used in dry cleaning applications such as per chloroethylene.
Detect halogen gases in fire-extinguishing system.

Technical parameters:
Operating temperature: 0~52
(30 to 125)
Maximum sensitivity: 6 gr/yr, for all halogenated refrigerants
Battery life: Approximately 50 hours normal use
Response time: Instantaneous
Work mode: continuous, no limitation
Fixed probe length: 20cm
Unit dimensions: 22.9cmx6.5cmx6.5cm
Warm-up time: approximately 6 seconds
Reset time: two to ten seconds
Power supply: 6V DC four cell 7# excellent batteries